Ordering details | |
---|---|
Product type description | IFL 20-400-11P - Ordering suffix |
Article number | 101059986 |
EAN Code | 4030661038421 |
eCl@ss | 27-27-01-01 |
Approval | |
Approval | CCC |
Global Properties | |
Permanent light | IFL - Ø 40 mm |
Standards | IEC/EN 60947-5-2; DIN VDE 0660-208 |
Compliance with the Directives (Y/N) | Yes |
Operating resource protection class | Protection class 2 |
Materials | |
- Material of the housings | Plastic |
- Material of the active surface | Plastic |
- Material of the terminal fixing | Plastic |
Housing coating | None |
Housing construction form | cylinder smooth |
Weight | 175 |
Mechanical data | |
Design of electrical connection | Screw connection |
Conductor with strain relief | No |
Cable section | |
- Min. Cable section | |
- Max. Cable section | 1 x 1.5 |
mechanical installation conditions | not flush |
Switch distance Sn | 20 mm |
Reduction factor 1 met (Y/N) | No |
Protection circuit | inductive interference protection, Protection against polarity reversal |
Pressure resistant (Y/N) | No |
• Wiring compartment | |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −25 |
- Max. environmental temperature | +70 |
Protection type IP | IP65 |
Electrical data | |
Design of control element | Normally open contact (NO) and Opener (NC) (antivalent) |
Number of wire | 4 |
Voltage type | DC, direct current |
Supply voltage UB | |
- Min. supply voltage | 10 |
- Max. supply voltage | 60 |
Switch frequency | approx. 100 HZ |
Voltage drop Ud | approx. 1.5 V (400 mA) |
Operating current Ie | 400 mA |
No-load current I0 | approx. 5.5 mA (24 V) |
Outputs | |
Design of control output | PNP |
LED switching conditions display | |
LED switching conditions display (Y/N) | Yes |
- yellow LED | |
ATEX | |
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
Dimensions | |
Dimensions of the sensor | |
- Width of sensor | 40 |