Характеристики и описание
General specifications | |
|---|---|
| Switching function | Normally open/closed (NO/NC) programmable |
| Output type | PNP |
| Rated operating distance | 10 mm (factory setting) |
| Near operating distance | 8 mm (can be activated by software) |
| Installation | non-flush |
| Output polarity | DC |
| Assured operating distance | 0 ... 8.1 mm |
| Reduction factor rAl | 1 |
| Reduction factor rCu | 1 |
| Reduction factor r304 | 1 |
| Reduction factor rSt37 | 1 |
| Output type | 3-wire |
Nominal ratings | |
| Operating voltage | 10 ... 30 V DC |
| Switching frequency | 0 ... 1300 Hz (switch point mode) 0 ... 80 Hz (window mode, switch point mode with stability alarm) |
| Hysteresis | typ. 3 % |
| Reverse polarity protection | reverse polarity protected |
| Short-circuit protection | pulsing |
| Voltage drop | ? 0.5 V |
| Operating current | 0 ... 200 mA |
| Off-state current | 0 ... 0.5 mA typ. 60 µA at 25 °C |
| No-load supply current | ? 15 mA |
| Time delay before availability | max. 150 ms |
| Constant magnetic field | 200 mT |
| Alternating magnetic field | 200 mT |
| Status indicator | LED yellow |
Functional safety related parameters | |
| MTTFd | 362 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Interface | |
| Interface type | IO-Link ( via C/Q ) |
| Transfer rate | COM2 (38.4 kBaud) |
| IO-Link Revision | 1.1 |
| Min. cycle time | 2.3 ms |
| Process data witdh | Process data input (control system side): 2 Bit Process data output (control system side): none |
| SIO mode support | yes |
| Device ID | 0x201114 (2101524) |
| Compatible master port type | A |
Compliance with standards and directives | |
| Standard conformity | |
Approvals and certificates | |
| Protection class | II |
| UL approval | cULus Listed, General Purpose Class 2 power source |
| CCC approval | CCC approval / marking not required for products rated ?36 V |
Ambient conditions | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications | |
| Connection type | cable PUR , 2 m |
| Core cross-section | 0.34 mm2 |
| Housing material | Brass, PTFE coated |
| Sensing face | PPS |
| Degree of protection | IP67 |
| Mass | 78 g |
Factory settings | |
| Default setting | |
General specifications
Inductive sensor NRN10-12GM40-E2-IO-C
Под заказ
Цену уточняйте
Минск ∙
Доставка
Оплата и гарантии