Ordering details | |
---|---|
Product type description | IFL 4-250-10D |
Article number | 101107015 |
EAN Code | 4030661048505 |
eCl@ss | 27-27-01-01 |
Approval | |
Approval | CCC |
Global Properties | |
Permanent light | IFL - 250 |
Standards | IEC/EN 60947-5-2; DIN VDE 0660-208 |
Compliance with the Directives (Y/N) | Yes |
Operating resource protection class | Protection class 2 |
Materials | |
- Material of the housings | Plastic |
- Material of the cable mantle | PVC |
- Material of the active surface | Plastic |
Housing construction form | Block |
Weight | 85 |
Mechanical data | |
Design of electrical connection | Cable H03VV-F |
Cable length | 2 |
Conductor with strain relief | No |
Conductors | 2 x 0,5 |
mechanical installation conditions | not flush |
Switch distance Sn | 4 mm |
Reduction factor 1 met (Y/N) | No |
Protection circuit | inductive interference protection, short-circuit and overload proof, Protection against polarity reversal |
Pressure resistant (Y/N) | No |
Ambient conditions | |
Ambient temperature | |
- Min. environmental temperature | −25 |
- Max. environmental temperature | +70 |
Protection class | IP67 to IEC/EN 60529 |
Electrical data | |
Design of control element | Normally open contact (NO) |
Number of wire | 2 |
Voltage type | DC, direct current |
Supply voltage UB | |
- Min. supply voltage | 10 |
- Max. supply voltage | 40 |
Switch frequency | approx. 1000 HZ |
Voltage drop Ud | ≤ 6 V (Или отправьте нам запрос на) |
Residual current Ir | approx. 0,5 mA |
Minimum operating current Im | 5 mA |
Operating current Ie | 200 mA |
Outputs | |
Design of control output | Two-wire |
LED switching conditions display | |
LED switching conditions display (Y/N) | Yes |
- yellow LED | |
ATEX | |
Explosion protection categories for gases | None |
Explosion protected category for dusts | None |
Dimensions | |
Dimensions of the sensor | |
- Width of sensor | 40 |
- Height of sensor |