Характеристики и описание

General specifications
Switching function	2 x normally open (NO)
Output type	PNP
Rated operating distance	2 mm
Installation	non-flush
Output polarity	DC
Assured operating distance	0 ... 1.62 mm
Reduction factor r_Al	0.45
Reduction factor r_Cu	0.35
Reduction factor r₃₀₄	0.75
Output type	4-wire
Nominal ratings
Operating voltage	10 ... 30 V
Switching frequency	0 ... 100 Hz
Reverse polarity protection	reverse polarity protected
Short-circuit protection	pulsing
Voltage drop	? 3 V
Operating current	0 ... 100 mA
No-load supply current	? 15 mA
Constant magnetic field	100 mT
Alternating magnetic field	100 mT
Tuning-out	typically 1 s
Operating voltage indicator	LED green
Switching state indicator	Switching state "closed" = LED red (S2) switching state "open" = LED yellow (S1)
Functional safety related parameters
MTTF_d	1445 a
Mission Time (T_M)	20 a
Diagnostic Coverage (DC)	0 %
Compliance with standards and directives
Standard conformity
Approvals and certificates
UL approval	UL Recognized
CCC approval	CCC approval / marking not required for products rated ?36 V
Ambient conditions
Ambient temperature	0 ... 50 °C (32 ... 122 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type	Connector plug M12 x 1 , 4-pin
Flexible lead, housing-sensor	80 mm , PUR (halogen-free) ; Outlet position - 1
Housing material	amplifier; PBT, PA6 + GD-ZN AL4 oscillators; PBT
Degree of protection	IP65