Характеристики и описание
General specifications | |
|---|---|
| Switching function | Normally open/closed (NO/NC) programmable |
| Output type | AS-Interface |
| Rated operating distance | 20 mm |
| Installation | flush |
| Assured operating distance | 0 ... 16.2 mm |
| Actual operating distance | 18 ... 22 mm typ. 20 mm |
| Reduction factor rAl | 0.4 |
| Reduction factor rCu | 0.35 |
| Reduction factor r304 | 0.85 |
| Slave type | A/B slave |
| AS-Interface specification | V3.0 |
| Required master specification | ? V2.1 |
Nominal ratings | |
| Operating voltage | 26.5 ... 31.9 V via AS-i bus system |
| Switching frequency | 0 ... 150 Hz |
| Hysteresis | 1 ... 15 typ. 5 % |
| Reverse polarity protection | reverse polarity protected |
| No-load supply current | ? 25 mA |
| Operating voltage indicator | LED, green |
| Switching state indicator | LED, yellow |
| Error indicator | LED, red |
Functional safety related parameters | |
| MTTFd | 1330 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
Approvals and certificates | |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ?36 V |
Ambient conditions | |
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Mechanical specifications | |
| Connection type | screw terminals |
| Information for connection | A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 % |
| Core cross-section | up to 2.5 mm2 |
| Housing material | PA/metal with epoxy powder coating |
| Sensing face | PBT |
| Housing diameter | |
| Degree of protection | IP68 / IP69K |
General specifications
По вопросу интересующей Вас продукции, пожалуйста, свяжитесь с нами:
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |
Или отправьте нам запрос на e-mail: zapros@filfar.by
Доставка
Оплата и гарантии